Flow Rate

Pro flow rate demonstration.

Recovery Rate

Pro recovery rate demonstration.

Pre-installation

Site preparation before installing.

Installation

Full installation walkthrough.

Commissioning Flush

Running the commissioning flush.

Filter Change

How to change the Pro filter — routine end-user maintenance.

Membrane Change

How to change the Pro membrane.

Descaling

How to descale the Pro.

Pump Change

How to change the Pro pump.

Motor — Remove & Reassemble

Removing and reassembling the motor.

Inlet Valve Change

How to change the inlet valve.

Drain Valve Change

How to change the drain valve.

Pure Water Valve Change

How to change the pure water valve.

Pressure Sensors — Change & Calibrate

Changing and calibrating pressure sensors.

Connectivity Sensors — Calibrate

Calibrating connectivity sensors.

LED & Data Readout Mode

Read operational hours and stop counts from the machine — useful for diagnosing recurring issues.

Troubleshooting — Stop for Leakage

All Pro machines have built-in leakage detection. Walk-through for diagnosing the cause.

Troubleshooting — Low Inlet Pressure

Inlet pressure sensors protect the pump from cavitation. Diagnose the cause of a low-pressure stop.

Troubleshooting — Low Purification

Diagnose stops caused by water-quality sensors detecting poor purification.

Troubleshooting — High Salinity (Purification 3)

Diagnose Purification 3 stops triggered by elevated salinity.

Troubleshooting — Low Pure Water Flow

Diagnose perceived low pure-water flow.

Quick Descaling (Dealer Procedure)

Faster descaling procedure available to dealers and distributors.