Flow Rate

Spirit flow rate demonstration.

Recovery Rate

Spirit recovery rate demonstration.

Pre-installation

Site preparation before installing.

Installation

Full installation walkthrough.

Clean Flush Program

Running the clean flush program.

Filter Change

How to replace the Spirit filter — routine end-user maintenance.

Membrane Change

How to change the Spirit membrane.

Descaling

How to descale the Spirit.

Pump Change

How to change the Spirit pump.

Motor — Remove & Reassemble

Removing and reassembling the motor.

Inlet Valve Change

How to change the inlet valve.

Drain Valve Change

How to change the drain valve.

Conductivity Sensors Change

How to change conductivity sensors.

Pressure Regulator Change

How to change the pressure regulator.

Panel Cover — Remove & Reassemble

Removing and reassembling the panel cover.

Outlet Pressure Switch Change

How to change the outlet pressure switch.

PCBA Change

How to change the PCBA.

Valve & Motor Test Mode

Running the valve and motor test mode.

Troubleshooting — Stop for Leakage

All Spirits have built-in leakage detection that stops the machine. Walk-through for diagnosing the cause.

Troubleshooting — Low Inlet Pressure

Inlet pressure sensors protect the pump from cavitation. Diagnose the cause of a low-pressure stop.

Troubleshooting — Low Purification

Diagnose stops caused by water-quality sensors detecting poor purification.

Troubleshooting — Low Pure Water Flow

Diagnose perceived low pure-water flow.

Measuring System Parameters

How to read system parameters from the machine — required information for many service errands.